Config Server Firewall

How To Open a Port in Windows Firewall

In the following tutorial, you will learn how to open a port in Windows Firewall. You can use this guide to open a port in Windows 11/10 or Windows Server.

To show how it works, we will create a Firewall rule that opens TCP port 80.

Open the Firewall: click the start button and type Firewall, and then choose Windows Defender Firewall with Advanced Security from the search result.

Windows Defender Firewall with Advanced Security

You will see a window like the following:

Create new inbound rule in Windows firewall

To open a port, go and right-click on Inbound Rules in the left pane and then click New Rule in the menu that appears.

The New Inbound Rule Wizard appears. Select Port as the type of rule you want to create.

Windows Firewall open port

In the next window, choose the protocol and then type the port number in the Specific local ports text box. After that, click Next.

Windows Firewall protocol and ports

On the Action screen, select Allow the connection and then click Next.

Windows Firewall allow connection

In the Profile screen, select the network profile (Domain, Private, and Public).

Specify the profiles for which this rule applies

Finally, give a name to the rule and click Finish.

open  port 80 from windows firewall

In the Inbound Rules section of the Windows Firewall, you will see all of the existing inbound rules, including the one you created to open a port.

how to open a port in windows

To disable a Firewall Rule, right-click and choose Disable Rule.

Disable a firewall rule in Windows 10

Open Multiple Ports

To open multiple ports at once, separate the numbers by using commas.

Open Multiple Ports in Windows Firewall

To open a range of ports (from 10000 to 10100 ) at once, use the following format:

open a range of ports at once

Only Allow Connections From Specific IP Addresses

You could modify firewall rules to allow users from specific IP addresses.

To do this, double-click the rule to open Properties and then go to the Scope tab.

Only Allow Connections From Specific IP Addresses

Under the Local IP address section, switch to the These IP addresses radio button and click on the Add button.

specify the IP Address you want to allow

A window appears, in which you can specify the IP Address you want to allow. Click the Add button again to add another IP address or subnet.