Config Server Firewall

Deleting Routes From the Routing Table in Windows With ROUTE DELETE Command

The command to delete a route from the Windows routing table is route delete.

 route delete <SUBNET_ID>

To delete a route in Windows, use the route delete command followed by the subnet ID (IP address of the destination network/host).

For example, to delete routes to the 192.168.1.0 network, issue the route delete command as follows:

route delete 192.168.1.0

To be more specific, for example, to delete the route to the destination network 10.10.0.0 with the subnet mask of 255.255.255.0, enter the route delete command as follows:

route delete 10.0.0.0 mask 255.255.255.0

You can issue the route print command to check the Windows routing table.

Deleting Routes From the Routing Table in Windows With ROUTE DELETE Command